Equipment Rentals

From our famed SuperTanks to basic pumps, compressors and hoses, FDF can deliver the top-notch equipment you need. For a complete listing of available rentals, call your FDF Sales Representative.

Long ago, FDF SuperTanks set the standard for ease of use, mobility and safety. With a capacity of up to 500 barrels, FDF SuperTanks are built of tough 3/16" corrugated steel and are fully paint-lined for corrosion resistance. A full safety stairway makes inspection and cleanout safe, easy and efficient.

Equipment Rentals Listing:

Supertanks
Liquid Mud Barges
Mud Pumps
Portable Mixing Units
Gas Busters
Hoses and Fittings
Hydro Blasters (Hot/Cold)
Air Movers

LIQUID MUD BARGE

Self contained liquid mud barge equipped with a 5x6 magnum pump with 12' impeller powered by a Deutz 6 cylinder air cooled 135 HP engine.

Specifications:

• Capacity 2400 Barrels

• Payload 824,000 Lbs./412 Tons

• Dimensions L - 140", W - 40.9", 8 ft daft

SUPER TANK

Specially manufactured for Francis Drilling Fluids, these Supertanks provide a high degree of efficiency and flexibility with a capacity of 500 barrels. Our Supertanks are constructed using 3/16" corrugated steel for added strength. Francis Drilling Fluids' Supertanks are portable and can be delivered, or re-spotted with a winch truck. A stairway located at the front of the Supertank makes inspection both safe and effortless. The Supertanks are a breeze for cleanup, too, because the inside of each tank is paint lined to resist scale and corrosion.

Mixing is just as easy with Francis Drilling Fluids' Supertanks. Each is equipped with a 4" gun line swedged down to 2" jets for thorough mixing. Alone or in series, on land or barge, the FDF SuperTank is the first choice for mixing and storage.

More Efficient
Up to 500 bbls. Capacity

Easy Mixing
Two 2" jets for thorough mixing

Safer
Front stairways makes inspections safe and effortless

Stronger
Constructed with 3/16" corrugated steel

Portable
Can be delivered or re-spotted with winch truck

Easy Clean-Up
Paint-lined Supertanks resist scale and corrosion

Connections

Front • One 6" butterfly valve
Two 4" butterfly valves
One 3" over-the-top load line

Back • One 4" butterfly valve
One 3" over-the-top load line

Note: Francis Drilling Fluids will guarantee its Supertank capacities as follows:

19.0 to 19.5 ppg. - 400 bbls.
18.0 to 18.9 ppg. - 450 bbls.
17.0 to 17.9 ppg. - 500 bbls.

Also available:

Supertanks with 8" Manifold and
4-4" connections

1- 4" suction with sump
with butterfly valve

1- 4" discharge line with gun lines with
butterfly valve

1-4" rear suction with butterfly valve

1-3" over-the-top load line

Calibrations

Capacity: 500 Barrels

Dimensions: 43.5'L x 8.5'W x 9.5'H

Gross Tare Weight: 25,000

Also available:

(Calibrations in Barrels/Inch)
3 6 9 11 14 17 20 23 26 29 32 35 37 40 43 45 48 50 53 55 58 60 63 65 68 70 73 75 78 80 82 85 87 90 92 95 97 100 102 105	13.5 27 40.5 49.5 63 76.5 90 103.5 117 130.5 144 157.5 166.75 181 195.25 205 220 230 245 255 270 280 295 305 320 330 345 355 370 380 390 405 415 430 440 455 465 480 490 500

PORTABLE MIXING UNIT

Specifications:
Overall: Length 42'6", Width 8'7", Height 11'3" (Tank) 14'4" (Handrail)
Weight of units: 27,020 LB.

Front Tank:
Barrels per foot	13.6 bbl./ft.
Total Capacity	118 bbl
Gun Lines	1-4" Swivel w/3" Barrel

Back Tank:
Barrels per foot
Note: The back tank will be measured 15.56 bbl./ft. until fluid level reaches the table in the rear of the tank. At this point the fluid level will be measured 22.5 bbl./ft.
Total Capacity	174.71 bbl.
Gun Lines	1-4" Swivel w/ 3" Barrel
Engine	100 Horsepower Diesel
Pump	6x5x14
Fuel Tank	113.6 gallons

GAS BUSTER

Specifications:
•	Front and Rear Ladder
•	4" Connections Each End Over Top
•	22" Cleanout Hatch
•	Overall Dimensions:	45' Long x 9' High x 8'4" Wide
•	Tank Dimensions:	42' Long x 6'21/2" High x 8'4" Wide
•	Gross Tare Weight:	25,000
•	Capacity:	330 bbls.

MDF 525 BBL MIXING TANKS

Specifications:
•	Unique Safety Stairway Design
•	Totally Enclosed Tank
•	Round Design for Strength & Quick Cleanout
•	Epoxy Lined Interior
•	Three 24" Confined Space Entry Hatches
•	8" Suction Manifold Line for Multiple tank connections
•	6" Discharge Manifold Line for Multiple Tank Connections
•	Internal Fluid Level Gauge
•	Internal Gun Line Equipped With 6 Mud GunNozzles
•	Diesel or Electric Powered Centrifugal Pumps